Jotun Jotafloor Topcoat Epoxy Paint is an amide-cured epoxy-based 2-component paint, which is highly effective and very easy to apply. This product can be blended in a wide variety of colors in Jotun's Industrial Paint Automatic Coloring System (MCI).
This product has good resistance to chemicals, abrasion and mechanical impact. If slip resistance is required, Jotafloor Non Slip can be used in the paint system. Used as a final coating in atmospheric environments. Suitable for use as a coating on concrete surface primers.
Intended Use:
Designed for a wide range of floors with multiple levels of mechanical and chemical impact resistance. Specially designed for floors that need a dust-resistant paint film that is highly wear resistant and aesthetically pleasing. Recommended for use in walkway areas in industrial plants, staircases, light load workshops, indoor parking decks, planting rooms, backyards.
Color: According to the color palette and automatic industrial paint mixing system (MCI)
Theoretical Coating Rating: 8 – 12.5 M2/L (Dry Thickness 60 μm – 40 μm respectively)
Packing: 5L/set; 20L/set
Paint Application Instructions:
- Surface preparation: To ensure long-term adhesion of the coating, the surface must be clean, dry and free of other impurities.
Minimum Surface Preparation: Clean, dry and undamaged compatible paint SSPC SP13/NACE NO 6 /ASTM D4258 -05 /ACI 503.6R-97/ SSPC-TR 5/ICRI Technical Manual 03741/NACE02203
The best way to clean the surface of concrete (laitance) is to apply the method of grinding the diamond head disc or spraying the beads, then vacuum the dust with a machine. For the old concrete surface, Jotun technical personnel need to conduct a field survey at the construction site to come up with the appropriate surface preparation method that needs to be carried out.
- Construction method: The product can be applied by spray, using an airless spray machine.
+ Paint brushes: Recommended for painting at angles and small areas. Take care to achieve the specified dry thickness.
+ Rollers/rollers: Yes, it can be used. Take care to achieve the specified dry thickness.
- Conditions in the process of painting application: The minimum surface temperature should be 10°C and at least 3°C above the dew point of the air, and climatic conditions are measured in the vicinity of the surface. It is necessary to ventilate enclosed areas well to ensure that the paint film dries well. The concrete moisture content should not exceed 4% (by volume). The paint film should not be exposed to oil, chemicals or mechanical impact until it has been fully cured.
- Mixing ratio (by volume)
Jotafloor Topcoat Comp A 4 Sections
Jotafloor Topcoat Comp B 1 part
- Solvent dilution/sanitizer: Jotun Thinner No. 17
- Surface drying time: 3 hours; Dry to go up for 8 hours (at 23 degrees Celsius)
